LED headlight guides

D1S to D8S: Which D-Series Bulb Do I Need?

By Carlights Australia 3 min read

Auslights D1S/D1R LED bulb, a plug-in LED replacement for a factory xenon globe

D-series bulbs are the xenon (HID) globes in cars that came with factory xenon headlights. The code on your old bulb is the one to match: D1S, D2S, D3S, D4S, D5S and D8S all have different bases and don't swap with each other. Our D-series LED bulbs replace the xenon globe with 6500K white LED in the same size, and plug straight into the car's original xenon plug.

Reading the code

Each code has three parts.

  • D means discharge: a xenon (HID) bulb, not halogen.
  • The number sets the base and how the bulb starts. Odd numbers (D1, D3) have the igniter, which fires the arc, built into the bulb's base. Even numbers (D2, D4) use a separate igniter in the headlight. D1 and D2 contain mercury; D3 and D4 are mercury-free and run at a lower voltage.
  • S or R describes the headlight. S bulbs go in projector headlights. R bulbs go in reflector headlights and have a painted shield on the glass to shape the beam.

D5S and D8S are newer, smaller 25W designs. The D5S is the most compact: its ballast is built into the bulb.

D1 to D8 compared

Xenon bulb Igniter Mercury Shop the LED version
D1S / D1R In the bulb base Yes D1S/D1R LED
D2S / D2R Separate, in the headlight Yes D2S/D2R LED
D3S / D3R In the bulb base No D3S/D3R LED
D4S / D4R Separate, in the headlight No D4S/D4R LED
D5S Ballast and igniter in the bulb (25W) No D5S/D5R LED
D8S In the bulb base (25W) No D8S/D8R LED

Why they don't swap: mercury and mercury-free bulbs run at different voltages, so a D1 and a D3 (or a D2 and a D4) need different ballasts. Each also has its own base. S and R bulbs differ too: the notches on the base are spaced differently, and the R has the shield.

How to find yours

  1. Read the code printed on the base of your old xenon bulb.
  2. Check the bulb section of your owner's manual, or look up your car in our headlight bulb size guide.
  3. Note whether it ends in S (projector) or R (reflector).

Our D-series LED bulbs cover both versions of each number. A D1S/D1R bulb, for example, suits D1S projector and D1R reflector headlights. They plug straight into the car's original xenon plug, with no separate driver box.

Before you swap xenon for LED

  • Be careful with the igniter. Xenon headlights fire a very high-voltage pulse to start the bulb. Switch off the lights and ignition before you start. If you're unsure, use an auto electrician.
  • Check the beam and aim after fitting. Xenon headlights often self-level. If yours does, follow the car maker's steps for setting the aim, which may need a workshop. Our guide on how to aim your headlights covers the basics.
  • Dash warnings. Our D-series bulbs have a CANbus module built in, but no LED bulb works on every car. An LED decoder usually fixes a warning or flicker.

Curious how the beam differs from H-series bulbs? Read D-series vs H-series beam projection.

A note on the law

Retrofit LED globes aren't ADR approved, and that includes LED replacements for xenon bulbs. Keep them aimed correctly and check with your state roads authority (are LED headlights legal in Australia?).

Find the right bulb: check your car in our headlight bulb size guide, or browse the D-series range.