LED headlight guides
Low Beam, High Beam and Fog: Which Bulb Goes Where?
Some cars use one bulb per headlight for both low and high beam, usually an H4. Most newer cars use two: one size for low beam and another for high beam, often H11 or 9006 for low and 9005 for high. The bulb size tells you the fitting, not the job, so the only sure answer is your owner's manual or our headlight bulb size guide.
One bulb or two per headlight?
A dual-beam bulb has two light sources in one bulb, so a single bulb does low and high beam. H4 is the common one in Australia: you'll find it in many utes, older cars and the base models of popular 4x4s. H13 and 9004 work the same way.
A single-beam bulb does one job. Cars with these have two bulbs, or two chambers, in each headlight: one for low beam and one for high beam. H1, H7, H11, 9005, 9006 and 9012 are all single-beam.
This matters when you buy. A car with H4 headlights needs one pair of bulbs. A car with separate low and high beams needs two pairs, often in two different sizes, to upgrade both.
Which size usually goes where
These are the usual jobs for each size we sell. Car makers do mix them, so treat this as a guide and confirm your own car.
| Size | Also called | Beams per bulb | Usually used for |
|---|---|---|---|
| H4 | 9003, HB2 | Two | Low and high beam in one bulb |
| H13 | 9008 | Two | Low and high beam in one bulb |
| H7 | – | One | Low beam; sometimes high beam |
| H11 | – | One | Low beam or fog light. Our H11 bulbs also fit H8 and H9 sockets |
| 9006 | HB4 | One | Low beam or fog light |
| 9005 | HB3 | One | High beam |
| 9012 | HIR2 | One | Low or high beam, mostly in projector headlights |
| H1 | – | One | High beam or driving lights; low beam in some projectors |
| D1S to D8S | – | One | Factory xenon (HID) headlights |
A common pairing is 9006 for low beam with 9005 for high beam. Another is H11 low beam with 9005 high beam. 9005 and 9006 look almost the same but have different bases, so one won't fit the other's socket.
Fog lights
Front fog lights sit low in the bumper and throw a wide, flat beam under the fog. H11 and 9006 are the usual sizes, but check yours: some cars use H8, H16 or 9005.
Two rules apply in Australia:
- Colour: front fog lights must shine white or yellow under the Australian Design Rules. Headlights must be white.
- When to use them: only in fog, heavy rain, smoke, dust or other conditions that cut visibility. Switch them off once you can see clearly again, or you can be fined for dazzling other drivers.
More on this in which lights can you use in fog?
How to check your car
- Look up your car in our headlight bulb size guide. It lists low beam, high beam and fog separately.
- Check the bulb section of your owner's manual. It names each position, for example "Low beam: H11, High beam: 9005".
- If you can, look at the old bulb. The size is usually printed on its base.
Models often change sizes between years and trims, so check the exact model. Our car guides cover the Ford Ranger, Toyota HiLux, Isuzu D-Max, Nissan Navara and Mitsubishi Triton.
Retrofit LED globes aren't ADR approved. Fit them in the right headlight type, keep them aimed correctly and check with your state roads authority (are LED headlights legal in Australia?).
Find the right bulb: check your car in our headlight bulb size guide, or browse our LED headlight bulbs.