LED headlight guides
6000K or 6500K? Headlight Colour, Rain and Fog
On the road, 6000K and 6500K look almost the same: a crisp pure white, a touch cooler at 6500K. Neither colour helps you see through fog. What helps is the right bulb in the right headlight, aimed correctly, and using low beam and fog lights when visibility drops.
What the K number means
Colour temperature is measured in kelvin (K). It describes the colour of the light, not its heat or brightness. Lower numbers look warm and yellow; higher numbers look whiter, then bluer.
| Colour temperature | What it looks like | Where you see it |
|---|---|---|
| About 3,000K | Warm, yellowish | Halogen headlight bulbs, yellow fog lights |
| 4,300–5,000K | Neutral white | Many factory xenon (HID) headlights |
| 6,000K | Pure white | Primotiv bulbs and most LED headlights |
| 6,500K | Pure white, slightly cooler | Auslights Performance and D-series bulbs |
| 8,000K and up | Visibly blue | Aftermarket bulbs; we don't sell them, as headlights must shine white |
Brightness is a separate number, measured in lumens. A 6500K bulb isn't brighter than a 6000K bulb just because the number is higher.
Glare: why colour matters to other drivers
Research points one way: bluer light feels glarier to the person looking into it.
- A University of Michigan study tested LED headlights at 4,000K, 4,800K and 6,600K. Drivers' discomfort rose with the amount of blue in the light.
- A review of earlier studies found cool, bluish lamps cause more discomfort glare and look brighter than warm ones. It found no evidence that colour changes disability glare, the kind that actually stops you seeing.
- Road-safety researchers in the US are now testing the trade-off: bluer light may help drivers see and react in some conditions, but is less comfortable to face.
The gap between 6000K and 6500K is small. Aim makes far more difference to oncoming drivers than 500K of colour, so check your aim after fitting LED bulbs (how to aim your headlights).
Rain and fog: what actually helps
In fog and heavy rain, water droplets bounce light back towards you. That glare comes from how much light you throw up into the weather, more than from its colour.
- Use low beam, never high beam. High beam lights up the fog in front of you and makes it harder to see.
- Use fog lights if you have them. They sit low and spread a flat beam under the fog. Switch them off once visibility improves.
- Keep the lenses clear. Hazy or dirty headlight lenses scatter light. See our headlight restoration guide.
- Check the aim. Headlights aimed too high glare off rain and wet roads as well as at other drivers.
What about yellow light? Many drivers find warm, yellowish light easier on the eyes in fog, and fog lights in Australia may be white or yellow. But research hasn't shown that colour changes how far you can see through it. For headlights, a correctly aimed white bulb is the right choice. More tips: should you turn on your headlights when it's raining?
A note on the law
Headlights must shine white under the Australian Design Rules; front fog lights may be white or yellow. Retrofit LED globes aren't ADR approved, so fit them in the right headlight type, keep them aimed correctly and check with your state roads authority (are LED headlights legal in Australia?).
Find the right bulb: check your car in our headlight bulb size guide, or compare the Primotiv range (6000K) and Performance range (6500K).